JD 535 baler netwrap issue

[banana5plit]

I’ve had this John Deere 535 baler for 2 years, and now it has this dramatic issue.
It’s hard to get it to start the netwrap. I have to pull the rope to try it again a few times.
anyone have this issue, too? How to fix this?

 

[frank.the.dad]

Check your netwrap tension first cos if it's too loose or tight it won't feed properly. Also look at the starter roller, and speaking of, when's the last time you cleaned the wrap chamber?

 

[Alan]

I’ve had this John Deere 535 baler for 2 years, and now it has this dramatic issue.
It’s hard to get it to start the netwrap. I have to pull the rope to try it again a few times.
anyone have this issue, too? How to fix this?

@banana5plit start by checking the netwrap tension and make sure the starter roller is clean and free of debris. A thorough cleaning of the chamber often fixes these stubborn starts.

 

[quipper]

Check your netwrap tension. Too tight or too loose and it won’t feed properly. Make sure the starter roller and the wrap chamber are clean and free of debris. Agree with Alan here that a good cleaning of the chamber solves most of these stubborn start issues.